Front view                                          Back view

Features :

• Built-in automatic voltage regulator (AVR)
• Simulated sine wave output waveforms
• Advanced green mode for energy saving and user-friendliness settings
• Automatic self-diagnostic and alarm warnings
• Surge, short circuit, and overload protections
• Discharge and overcharge protection
• Scheduling shutdown & reboot function
• Events recorder of power incidents
• Tel/modem/network surge suppression  

	Model	RPT-1025	RPT-1500	RPT-2000
	Capacity	1025VA/615W	1500VA/900W	2000VA/1200W
INPUT	Voltage	100V / 110V / 120V ±25% 220V / 230V / 240V ±25%
	Frequency	50Hz / 60Hz ±10% auto sensing
OUTPUT	Voltage (battery)	100V / 110V / 120V ±5% 220V /230V / 240V ±5%
	AVR	When input voltage between -9% to -25% of nominal, increase output by 15%. When input voltage between +9% to +25% of nominal, decrease output by 13%.
	Frequency	50Hz / 60Hz ±1%
	Waveform	Simulated sine wave
	Outlet quantity	IEC*6 as standard; Customized receptacle can be discussed.
	Transfer time	2 to 4 millisecond including detection time (typical)
PROTECTION	Overload	UPS automatic power off if overload exceeds 110% of nominal at 60 seconds; 130% at 3 seconds
	Surge	Yes
	Short circuit	UPS output cut off immediately or protected by input breaker
	Tele-communication	RJ 45
	Fuse	Yes
	Alarm	Buzzer beeps under backup mode, battery low, battery charging fault, and overload
BATTERY	Type	12V 7Ah x2	12V 7.2Ah x2	12V 9Ah x2
	Typical recharge time	4 hours to 90%
GENERAL	Dimension(D x W x H)	360x146x164 mm
	Display	LED or LCD indicator (Option)
	Communication interface	USB B-type
	Audible noise	< 40dBA (1M from surface)
	Ambient operation	0 to 40℃

Communication Interface

Model	TEL/FAX	RS-232	USB
RPT-1025AP	●	◆	●
RPT-1500AP	●	◆	●
RPT-2000AP	●	◆	●

●Standard Function   ◆Optional

Receptacle Options