PCM -INDEX-

Home > Product > On-Line UPS > ONL 7.5K/10K/15KS (LCD)

ONL 7.5KS/10KS/15KS (LCD)

Advanced Power Protection for Enterprise Network

Features :

Sinewave Pulse Width Modulation (SPWM)
IGBT inverter design
Double conversion on-line system
Multi-microprocessor control
Smart RS-232 communication port
SNMP management capability
Wide Input Voltage Windows (+/-25%)
Pure sinewave output less than 3% THD
Versatile, modular design
Expandable battery run time
Generator compatible
Cold start (DC power on)
Load/Battery power meter display
Overload, on-line, battery status LED/LCD
Advanced Battery Management (ABM)
Automatically charging in UPS off mode
20kHz SPWM high frequency inverter

TOWER MODEL (LED DISPLAY)			ONL- 10KS31	ONL- 15KS31	ONL- 20KS31	ONL- 20KL31
TOWER MODEL (LCD DISPLAY)			ONL-10K31-LCD	ONL-15K31-LCD	ONL-20K31-LCD	ONL-20KL31-LCD
POWER RATING	P.F.=0.8		10KVA/8KW	15KVA/12KW	20KVA/16KW	20KVA/16KW
AC INPUT	Voltage		220V, 285 ~ 476 V
	Frequency		50 Hz or 60 Hz +/- 5 Hz
	Phase		Three phase 3~3W, 3~4W
BATTERY	DC Voltage		192V	192V	360V	360V
	Back-Up Time	Full Load	10 mins	10 mins	10 mins	10 mins
		Half Load	25 min	28 min	24 min	24 min
	Type		Sealed lead acid battery, free maintenance
	Protection		Battery low cut-off without draining any current
	Recharge Time		About 8 hours to 90% after fully discharged
AC OUTPUT	Frequency		50Hz / 60Hz
	Voltage, phase		110 /115 / 120 / 220 / 230 / 240 V Single phase
	Voltage regulation		+/- 1 %
	Frequency stability		+/- 0.5 %
	Power factor		0.8 ~ 1.0 (lagging)
	Harmonic distortion		< 3 % of T.H.D. at linear load
	Overload detection		125% to 150% for 20 seconds, 150% for 10 cycle
EFFICIENCY	Whole		> 85 %	> 85 %	> 85 %	> 85 %
			> 90 %	> 90 %	> 90 %	> 90 %
TRANSFER	Power Failure or Recovery		0 ms
	Overload Disappear		Auto transfer to UPS
	UPS to Bypass or vice versa		0 ms
NOISE LEVEL	1m Distance		< 60 dBA
LCD INDICATOR	Status		Indicate line, bypass, inv, fault, bat capacity, load capacity
ALARM	Battery discharge		The first warning will beep every 4 seconds to indicate battery in use. The second warning will beep every 1 second to signal battery low condition.
	UPS fault		Continuous beeping sound
ENVIRONMENT	Temperature		0 - 40 deg
	Humidity		0 % ~ 95 % (Non condensing)
INTERFACE	Dry Contact		Sends AC failure and battery low signals, and receives shutdown signal
	RS232		Detect power failure, Battery low, Schedule UPS on/off, AC power status display
	Option		Novell, SNMP, Windows NT, Windows 95/98
PHYSICAL SIZE	W x D x H (mm)		350 x 641 x 1010 13.8" x 25.2" x 38.2"			600 x 857 x 1010 23.6"x34.4"x38.2"
WEIGHT	Net Weight (Kgs)		167 (367.4 lb)	175 (385 lb)	215 (473 lb)	431 (948.2 lb)

BACK