PCM -INDEX-

Home > Product > On-Line UPS > ONL 7.5K/10K/15KS (LCD)

ONL 7.5KS/10KS/15KS (LCD)

Advanced Power Protection for Enterprise Network

Features :

Sinewave Pulse Width Modulation (SPWM)
IGBT inverter design
Double conversion on-line system
Multi-microprocessor control
Smart RS-232 communication port
SNMP management capability
Wide Input Voltage Windows (+/-25%)
Pure sinewave output less than 3% THD
Versatile, modular design
Expandable battery run time
Generator compatible
Cold start (DC power on)
Load/Battery power meter display
Overload, on-line, battery status LED/LCD
Advanced Battery Management (ABM)
Automatically charging in UPS off mode
20kHz SPWM high frequency inverter

TOWER MODEL (LED DISPLAY)			ONL- 7500S	ONL-10KS	ONL-15KS
TOWER MODEL (LCD DISPLAY)			ONL-7500-LCD	ONL-10K-LCD	ONL-15K-LCD
POWER RATING	P.F.=0.8		7.5KVA/6KW	10KVA/8KW	15KVA/12KW
AC INPUT	Voltage		110V SYSTEM : 82.5~137.5V 220V SYSTEM : 165 ~ 275 V		165 ~ 275 V
	Frequency		50 Hz or 60 Hz +/- 5 Hz
	Phase		Single phase
BATTERY	DC Voltage		192V	192V	192V
	Back-Up Time	Full Load	14 mins	10 mins	10 mins
		Half Load	35 mins	25 mins	28 mins
	Type		Sealed lead acid battery, free maintenance
	Protection		Battery low cut-off without draining any current
	Recharge Time		About 8 hours to 90% after fully discharged
AC OUTPUT	Frequency		50Hz / 60Hz
	Voltage, phase		110 /115 / 120 / 220 / 230 / 240 V Single phase
	Voltage regulation		+/- 1 %
	Frequency stability		+/- 0.5 %
	Power factor		0.8 ~ 1.0 (lagging)
	Harmonic distortion		< 3 % of T.H.D. at linear load
	Overload detection		125% to 150% for 20 seconds, 150% for 10 cycle
EFFICIENCY	Whole		> 85 %	> 85 %	> 85 %
			> 90 %	> 90 %	> 90 %
TRANSFER	Power Failure or Recovery		0 ms
	Overload Disappear		Auto transfer to UPS
	UPS to Bypass or vice versa		0 ms
NOISE LEVEL	1m Distance		< 60 dBA
LCD INDICATOR	Status		Indicate line, bypass, inv, fault, bat capacity, load capacity
ALARM	Battery discharge		The first warning will beep every 4 seconds to indicate battery in use. The second warning will beep every 1 second to signal battery low condition.
	UPS fault		Continuous beeping sound
ENVIRONMENT	Temperature		0 - 40 deg
	Humidity		0 % ~ 95 % (Non condensing)
INTERFACE	Dry Contact		Sends AC failure and battery low signals, and receives shutdown signal
	RS232		Detect power failure, Battery low, Schedule UPS on/off, AC power status display
	Option		Novell, SNMP, Windows NT, Windows 95/98
PHYSICAL SIZE	W x D x H (mm)		350 x 641 x 1010 13.8" x 25.2" x 38.2"
WEIGHT	Net Weight (Kgs)		160 (352 lb)	167 (367.4 lb)	175 (385 lb)

BACK