PCM -INDEX-

Home > Product > Interactive UPS > Smart King Pro 500 / 700

SMART KING PRO 500A / 700A

Ultra small UPS with pure sine wave output for quality protection for computers and servers.

Features :

Line interactive design
Boost and buck AVR
Overload, AVR, on-line, back up and battery status LEDs display
Fully digitized microprocessor controlled
Smart RS-232 or USB communication port (500VA~700VA models)
Lightning and surge protection
Short circuit and overload protection
50/60Hz frequency auto sensing
Tel/modem internet spike protection
Advanced battery management (ABM)
Cold start (DC power on)
Hot swappable battery replacement by users
SNMP capability (option)

MODEL		SKP-500A	SKP-700A
CAPACITY	Capacity	300W	420W
OUTPUT	Voltage (on battery)	Pure sine wave at +/-5% of nominal, -10% of nominal after low battery warning
	Frequency (on battery)	50 or 60 Hz +/-0.5%
	Voltage Regulation( AVR)	AVR automatically increase output voltage 15% above input voltage if -9% to -25% of nominal. AVR automatically decrease output voltage 13% below input voltage if +9% to +25% of nominal.
INPUT	Voltage	+/-25% at line input, single phase
	Frequency	50 or 60 Hz +/- 5Hz (auto sensing)
PROTECTION & FILTERING	Spike Protection	420 Joules (2x0V) / 225 Joules (1x0V), 8/20µs
	Unit Input	Fuse for 2x0V models
	Overload Protection	UPS automatic shutdown if overload exceeds 110% of nominal at 20 seconds and 125% at 5 seconds
	EMI/RFI filter	10dB at 0.15MHz, 50 dB at 30MHz
	Transfer Time	6-8 milliseconds (typical), including detection time
	Short Circuit	UPS output cut off immediately or input fuse protection
BATTERY	Type	Hot swappable, sealed, maintenance-free lead acid battery
	Typical Recharge Time	4 hours (to 90% of full capacity)
	Back-up Time (one PC with a 15" LCD monitor)	about 20 minutes	about 30 minutes
	Protection	Automatic self-test & discharge protection, Replace battery indicator
PHYSICAL	NET WEIGHT kg (lbs)	6.2 (13.7 lbs)	6.7 (14.7 lbs)
	Dimension WxDxH (mm)	97 x 320 x 135 (3.8" x 12.5" x 5.3")	135 x 360 x 170 (5.3" x 14.2" x 6.7")
ALARM	Battery Back-up	Slow beeping sound (about 0.25 Hz)
	Battery Low	Rapid beeping sound (about 1.00 Hz)
	Overload	Continuously beeping sound
INTERFACE	Dry contact	Sends AC fail and battery low signals, and receives shutdown signal from computer.
	RS232 / USB	RS232 or USB port (OPTIONAL)
	SNMP (option)	Simple network management protocol
ENVIRONMENT	Ambient Operation	3,500 meters max, elevation. 0-95% humidity non-condensing, 0-48 deg
	Audible Noise	<45 dBA (1 meter from surface)
	Storage Condition	15,000 meter max. elevation

BACK