PCM -INDEX-

Home > Product > On-Line UPS > ONL 2000/3750/6250S

ONL 2000S/3750S/6250S (LCD)

Advanced Power Protection for Enterprise Network

Features :

Sinewave Pulse Width Modulation (SPWM)
IGBT inverter design
Double conversion on-line system
Multi-microprocessor control
Smart RS-232 communication port
SNMP management capability
Wide Input Voltage Windows (+/-25%)
Pure sinewave output less than 3% THD
Versatile, modular design
Expandable battery run time
Generator compatible
Cold start (DC power on)
Load/Battery power meter display
Overload, on-line, battery status LED/LCD
Advanced Battery Management (ABM)
Automatically charging in UPS off mode
20kHz SPWM high frequency inverter

TOWER MODEL (LED DISPLAY)			ONL-2000S	ONL-3750S	ONL-6250S
TOWER MODEL (LCD DISPLAY)			None	ONL-3750LCD	ONL-6250LCD
POWER RATING	P.F.=0.8		2KVA/1.6KW	3.75KVA/3KW	6.25KVA/5KW
AC INPUT	Voltage		110V SYSTEM : 82.5~137.5V 220V SYSTEM : 165 ~ 275 V
	Frequency		50 Hz or 60 Hz +/- 5 Hz
	Phase		Single phase
BATTERY	DC Voltage		120V	192V	192V
	Back-Up Time	Full Load	12 mins	12 mins	5 mins
		Half Load	30 mins	29 mins	15 mins
	Type		Sealed lead acid battery, free maintenance
	Protection		Battery low cut-off without draining any current
	Recharge Time		About 8 hours to 90% after fully discharged
AC OUTPUT	Frequency		50Hz / 60Hz
	Voltage, phase		110 /115 / 120 / 220 / 230 / 240 V Single phase
	Voltage regulation		+/- 1 %
	Frequency stability		+/- 0.5 %
	Power factor		0.8 ~ 1.0 (lagging)
	Harmonic distortion		< 3 % of T.H.D. at linear load
	Overload detection		125% to 150% for 20 seconds, 150% for 10 cycle
EFFICIENCY	Whole		> 80 %	> 84 %	> 85 %
			> 86 %	> 88 %	> 90 %
TRANSFER	Power Failure or Recovery		0 ms
	Overload Disappear		Auto transfer to UPS
	UPS to Bypass or vice versa		0 ms
NOISE LEVEL	1m Distance		< 55 DBA
LCD INDICATOR	Status		Indicate line, bypass, inv, fault, bat capacity, load capacity
ALARM	Battery discharge		The first warning will beep every 4 seconds to indicate battery in use. The second warning will beep every 1 second to signal battery low condition.
	UPS fault		Continuous beeping sound
ENVIRONMENT	Temperature		0 - 40 deg
	Humidity		0 % ~ 95 % (Non condensing)
INTERFACE	Dry Contact		Sends AC failure and battery low signals, and receives shutdown signal
	RS232		Detect power failure, Battery low, Schedule UPS on/off, AC power status display
	Option		Novell, SNMP, Windows NT, Windows 95/98
PHYSICAL SIZE	W x D x H (mm)		265 x 532 x 583 10.4"x20.9"x22.9"	265 x 641 x 750 10.4" x 25.2" x 30.4"
WEIGHT	Net Weight (Kgs)		76 (167.2 lb)	117 (257.4 lb)	90 (198 lb)

BACK