PCM -INDEX-

Home > Product > Interactive UPS > Smart King AL Series

Smart King AL Series 1000/2000/3000

Front View | Back View

Back View

UPS with continuous rated capacity for continous backup main unit excludes internal batteries.

Features :

True sinewave output
Backup time depends on quantities of connected ext. battery packs
Built in fast charger (nominal : 5.5A, 3.5A~8A adjustable)
Line interactive design
Boost and buck AVR
Hot swappable battery by users
Fully digitized microprocessor controlled
Smart RS-232 communication port
Lightning and surge protection
Short circuit and overload protection
50/60Hz frequency auto sensing
Tel/modem internet spike protection
Smart power management with software
Cold start (DC power on)
Overload, on-line, battery status LED or LCD display
Load/Battery power meter display
Advanced battery management (ABM)
Energy saving (UPS sleep mode)
Site wiring fault warning *
SNMP capability

* Feature only for 100V/110V/115V models

Extended Run-time Model (Battery Excluded)		SAL-1000A	SAL-2000A	SAL-3000A
INPUT	Capacity	1000VA	2000VA	3000VA
	Voltage	+/-25% at line input, single phase
	Frequency	50 or 60Hz +/-5Hz (auto sensing)
OUTPUT	Voltage (on battery)	Pure sine wave at +/-5% of nominal, -10% of nominal after low battery warning
	Frequency (on battery)	50 or 60Hz +/-0.5%
	Voltage Regulation(AVR)	AVR automatically increase output voltage 15% above input voltage if -9% to -25% of nominal. AVR decrease output voltage 15% below input voltage if +9% to +25% of nominal
PROTECTION & FILTERING	Spike Protection	320 Joules, 2ms
	Unit Input	Fuse for 110V models Except 3000A, breaker for 220V models Except 1000A
	EMI/RFI filter	10dB at 0.15MHz, 50 dB at 30MHz
	Overload Protection	UPS automatic shutdown if overload exceeds 110% of nominal at 20 seconds and 125% at 5 seconds.
	Transfer Time	2/4 milliseconds (typical), including detection time
	Short Circuit	UPS output cut off immediately or input fuse(or breaker) protection
BATTERY	Type	Hot swappable, sealed, maintenance-free lead acid, with 3-6 years lifetime
	Typical Recharge Time	4 hours (to 90% of full capacity)
	Protection	Automatic self-test & discharge protection, Replace battery indicator
	Back up Time (one PC and one 15" monitor)	�� 90 min	�� 120 min	�� 140 min
Net Weight Kg (lbs)	Tower	25.0 (55.0 lb)	30.0 (66.0 lb)	30.0 (66.0 lb)
	19" Rack-mount	26.1 (57.4 lb)	28.4 (62.5 lb)	28.4 (62.5 lb)
DIMENSION W x D x H (mm)	Tower	170 x 450 x 226 (6.7" x 17.7" x 8.9")
	19" Rack-mount	483 x 381 x 130 (19.0" x 15.0" x 5.1")
LCD Indicators	Status	Indicate line, bypass, inv, backup, fault, bat capacity, load capacity, I/P frequency, O/P voltage, O/P frequency, inside temperature, fault statuts, load
INTERFACE	RS232	Detect battery low, Schedule UPS on/off, AC input/output power status display.
	Dry contact	Sends AC fail and battery low signals, and receives shutdown signal from computer.
	Option	Novell, SNMP, Windows NT, Windows 95/98/2000/ME
ALARM	Battery Back-up	Slow beeping sound (about 0.25Hz)
	Battery Low	Rapid beeping sound (about 1.00Hz)
	Overload	Continuously beeping sound
ENVIRONMENT	Ambient Operation	3,500 meters max, elevation. 0-95% humidity non-condensing, 0-40 deg
	Audible Noise	<45dBA (1 meter from surface)
	Storage Condition	15,000 meter max. elevation

BACK