Chinese Website
   
   
Home > Product > On-Line UPS > Vanguard Chain 6KVA/10KVA

Vanguard Chain 6KVA / 10KVA Parallelable Online UPS

Parallelable Online UPS

The Vanguard Chain offers many of the standard performance features of the Vanguard series but in a 3U version, making it ideal for installation in 19-inch rack space.
It is available in both single-phase input and single-phase output configuration and provides the security of a truly redundant parallel system whilst offering the highest degree of reliability for mission critical loads and applications.

Product Info

- DPS controller provides highest performance
- True on-line and double conversion topology
- Pure sine-wave output with less than 3% THD
- Redundncy UPS system (Capable parallel function)
- Capable hardwired for Emergency Switching Power off function
- UPS Emergency Remote Power off function
- Automatic battery diagnostics and battery check
- Detail UPS information LCD display
- Multiple language LCD display (English / European languages)
- Extended back up time with battery pack
- Smart battery charging for battery pack
- Back-feed protection
- Electronic bypass function
- UPSMON plus software monitoring
- Lighting and surge protection
- Short Circuit and overload protection
- RS-232 communication port with monitor software
- Fan lock detection
- On line output voltage selected
- Power factor correction
- Support various interface cards



VCR - 6KVA / 10KVA

Main unit rear side design:
Power-inlet AC : Hardwired
Battery : Connection via special plug / connectors
SLOT for SNMP, SIC and other extensions
2 paralleling ports, D-SUB 25-pin





Battery Module Rear Side:





Battery Module rear side with output socket : (Option)


Vanguard Chain Rack Mount Model VCR-6KVA VCR-10KVA
Capacity Capacity (VA) 6000VA 10000VA
Capacity (W) 4200W 7000W
Input Nominal input voltage(V) 230V
Input phases Single Phase
Input voltage range(V) 176-276V
Nominal fre-quency(Hz) 50 / 60 Auto selection
Frequency toler-ance(%) +/- 5%
Power factor (at nominal V) > 0.97
Input Current distortion THDi(%) <= 10%
Output Voltage (on battery) 208V, 220V, 230V, 240V +/-2% (Selectable Output Voltage)
Frequency (on bat-tery) 50 / 60 Hz +/-0.5%
Transfer Time 0 ms
Overload Recovery Auto transfer to UPS
UPS Design Tech-nology On-Line / Fully digitized microprocessor controlled
Output Wave Form Sine wave
Harmonic distortion < 3% of T.H.D. at linear full load
< 8% of T.H.D. at Non-linear full load
Crest Factor 3 : 1
Parallel function(Total Parallel Number) Parallel up to 3 units (Total 4 units)
Battery Type Sealed, maintenance-free lead acid batteries
DC Voltage (V) 240 V
End of discharge volt(V) 200
Management Self-test, adjustable battery transfer points and alarm settings
Battery Protection Cut off without draining any current when battery is low
Cold Start (DC start) YES
Battery Module Optimum battery temperature (˘XC) 15-25
Battery type / stan-dard 7.2AH / 12V or equivalent 9AH / 12V or equivalent
Number of batteries (pcs) 20
Discharging time(minutes) 7 mins 4 mins
Typical Recharge Time to 90% Full 4 hours 5 hours
Dimensions W x D x H (mm) 428 x 597 x 130 428 x 657 x 130
Weight (including batteries packs) (kg) 66 68
Shipping Weight (kg) 75.7 83
Battery charger Battery nominal volt-age(Vdc) 240V
input voltage range(Vac) 176 - 276V
Charger output current 1.2(typical)
Protection and Filtering Surge Protection TBD
Overload Protection 105 - 125% for 1 minute
126 - 150% for 10 seconds
> 150 for < 2 seconds
105 - 125% for 1 minute
126 - 150% for 10 seconds
> 150 for < 2 seconds
Short Circuit Protection UPS output cut off immediately or input fuse / circuit breaker protec-tion
Sytem/Display/
Warning
Visual Display (LED model) UPS line-mode(green), battery mode(yellow), bypass(yellow), fault(red)
Visual Display (LCD model) Input / output voltage, input / output frequency, on-line mode, back up mode, bypass mode, battery capacity, load level
Audible Alarm
(Battery backup)
Beep every 5 sec
UPS Fault Continuous beeping sound and LCD display
Communication RS-232 Serial Port
Physical Input Inlet Hardwire
Receptacles Hardwire
Dimensions W x D x H (mm) 428 x 671 x 130 428 x 671 x 130
Net Weight (kg) 23 TBD
Shipping Weight (kg) 27 TBD
Environment Operating Temperature 0~40˘XC / 32~104˘XF
Storage Temperature -20~50˘XC / -4~122˘XF
Altitude 3,500 meters max
Audible Noise (1 meter from surface) < 55 dBA
Relative Humidity 0 ~ 95% humidity, non-condensing
Conformance Safety TBD
EMC (EMS / EMI) TBD
Equipment Protection Policy Warranty policy may vary depends on region

Main unit rear side design:

Power-inlet AC : Hardwired
Battery : Connection via special plug / connectors
SLOT for SNMP, SIC and other extensions
2 paralleling ports, D-SUB 25-pin


BACK




Copyright © Powercom Co., Inc. 2006, All Rights Reserved.