UPS
Model		RPT-600AP	RPT-800AP	RPT-1000AP	RPT-1025AP	RPT-1500AP	RPT-2000AP
		RPT-600A	RPT-800A	RPT-1000A
Capacity(VA)		600 VA	800 VA	1000 VA	1025 VA	1500 VA	2000 VA
Capacity(Watts)		360 W	480 W	600 W	615 W	900 W	1200 W
Form		Tower Type
INPUT
Nominal Voltage		100 / 110 / 120VAC or 220 / 230 / 240VAC
Voltage Range		75 - 150VAC or 165 - 300VAC
Frequency Range		50Hz / 60Hz(Auto Sensing)
OUTPUT
Voltage		100 / 110 / 120VAC or 220 / 230 / 240VAC
Frequency Range		50 / 60 Hz 0.25HZ
Transfer Time(ms)		2 - 4 (Typical)
Waveform		Simulated Sine Wave
BATTERY
RPT Model		600VA	800VA	1000VA	1025VA	1500VA	2000VA
Type & Number		12V7Ah x 1	12V7.2Ah x 1	12V9Ah x 1	12V7Ah x 2	12V7.2Ah x 2	12V9Ah x 2
Recharge Time		3 ~ 4 hours to 90% capacity
PROTECTION
Full Protection		Overload, Surge, Short Circuit
Tele Communication		RJ11 / RJ45 : AP model
Management & Communication
Indicator		LED indicator			LED or LCD
Communication Port		USB Btype : AP Model
PHYSICAL
Dimension (WxDxH)(mm)		100 x 278 x 143			147 x 360 x 164
Weight (kgs)		4.3	4.8	5.4	8.5	10.1	11.1
Shipping Dimension (mm)		147 x 329 x 227			233 x 449 x 277
Shipping Weight (kgs)		4.8	5.3	5.9	9.7	11.3	12.3
ALARM
Overload		Continuous Beeping
Battery Mode		Beep every 2 seconds
Low Battery		Beep every 0.5 second
MANAGEMENT
Interface		Usb Port / Serial Port / Software
ENVIRONMENT
Humidity		0 ~ 95% RH at 0 ~ 40℃(Non-condensing)
Audible Noise		Less than 40 dB

* While 208V output, capacity will derated to 90%

* Specifications are subject to change without further notice

* Specifications are for reference, actual information should be based on real product